Pfaff Industrial 3307-1 Series, Instruction Manual, Page: 111 / 130

Adjustment
111
Group Parameter Description
Setting
range
Set
value
500 508 No. of stitches with "thread clamp
closed" at end of seam*
Angle position for "thread clamp closed"
at end of seam
*No. of stitches (counted back from last
stitch) till thread clamp is switched on.
(0 last stitch)
0 - 3
0 - 127
0
80
510 Angle position for "thread clamp open"
at last needle penetration before thread
trimming
0 - 127 120
511 Securing stitches before cutting 0 - 2 0
512 Measuring point of missed stitch
detection function with display of the
thread strength
0 - 127 115
600 601 Move stepping motor clamp and needle
602 Display inputs:
0123456789ABCDEF
Position on the Display
0: Not assigned
1: Not assigned
2: Needle in material (NIS)
3: End knotting engaged (E16 - X5:7)
4: Error reset key S101 (E12 - X5:12)
5: Not assigned (E11 – X5:11)
6: Not assigned (E10 – X5:10)
7: Not assigned (E9 – X5:9)
8: Programmable input 1 (E8 – X5:16))
9: Programmable input 2 (E7 – X5:15)
A: Not assigned (E6 – X5:14)
B: Not assigned (E5 – X5:5)
C: Clamp lowered S 24 (E 4 – X 5:4)
D: Not assigned (E3 – X5:3)
E: Reference needle (photoelectric barrier)
F: Reference clamp (photoelectric barrier)
▲
= basic position
0
-
-
-
off
▲
off
▲
-
-
-
-
-
-
-
raised
▲
-
switched
switched
I
-
-
-
on
on
-
-
-
-
-
-
-
lowered
-
not assigned
not assigned
Meaning of the
display value