PEUGEOT Boxer Page 163 Handbook Download

Page: 163 / 184

161

QUICK HELP

Changing a wiper blade

CHANGING A WIPER BLADE

The steps, located in the front bumper,
enable you to access the blades and the
screenwash nozzles.

Changing a front wiper blade

Lift the wiper arm.
Unclip the blade by pressing the button and
remove it by pulling it outwards.
Fit the new blade and ensure that it is
secured correctly.
Push back the wiper arm.

Changing the rear wiper blade

Lift the wiper arm, then unclip the blade and
remove it.
Fit the new blade and push back the wiper arm.

To return the windscreen wipers to their
normal position, switch on the ignition
and operate the wiper stalk.

Check that the screenwash or headlamp
wash nozzles are not blocked.

Summary of Contents for Boxer

























































































































































































Search results

Summary of Contents for Boxer

Reviews:

Related manuals for Boxer

Brands by name

Popular brands

PEUGEOT Boxer, Handbook

Search results

Summary of Contents for Boxer

Reviews:

Related manuals for Boxer

Brands by name

Popular brands