PEUGEOT Boxer Handbook Download

Page: 139 / 184

137

Opening the bonnet

CHECK

On the inside

This operation must only be carried out with
the vehicle stationary and the driver's door
open.
Pull the release lever on the side of the
dashboard towards you.

On the outside

Push the safety catch lever located above
the grille to the right and raise the bonnet.

To close

Lower the bonnet and release it at the end of
its travel. Check that the bonnet has latched.

OPENING THE BONNET

Bonnet stay

Unclip the stay and tilt it to insert it in the
first notch, then the second.
Before closing the bonnet, put the stay back
in its housing.

If the bonnet is not closed
correctly, this warning lamp
comes on in the instrument panel.

Before doing anything under the
bonnet, switch off the ignition with the

key to avoid any risk of injury resulting from
an automatic change to START mode.

Summary of Contents for Boxer

























































































































































































Search results

Summary of Contents for Boxer

Reviews:

Related manuals for Boxer

Brands by name

Popular brands

PEUGEOT Boxer, Handbook

Search results

Summary of Contents for Boxer

Reviews:

Related manuals for Boxer

Brands by name

Popular brands