PEUGEOT Boxer Handbook Download

Page: 58 / 184

Ventilation

WITH MANUAL ADJUSTMENT

If your vehicle is fitted with these controls,
they are located on the dashboard on the
centre console control panel.

Temperature adjustment

Control positioned:
- in the blue zone provides cool

air,

Air flow

The force of the blown air, from
the vents, varies from 1 to the
strongest 4. Remember to adjust
this control in order to reach the

ambient air comfort level. To switch off the
blower, place the control in position 0.

Air conditioning

The air conditioning mode can only operate
with the engine running.

The air blower must be set to at
least 1.
Pressing the button triggers the
operation of the air conditioning,

the LED is on. Pressing the button again
switches the function off and the LED is
switched off.

Air distribution

The air supply distribution is directed by the
control turned towards:

the side vents and the central
vents,

the side vents, the central vents
and the footwells,

the footwells,

the windscreen, the footwells and
the side windows,

the windscreen and the side
windows.

- in the red zone provides

heating of the interior ambient
air.

Summary of Contents for Boxer

























































































































































































Search results

Summary of Contents for Boxer

Reviews:

Related manuals for Boxer

Brands by name

Popular brands

PEUGEOT Boxer, Handbook

Search results

Summary of Contents for Boxer

Reviews:

Related manuals for Boxer

Brands by name

Popular brands