PEUGEOT Boxer Handbook Download

Page: 109 / 184

107

Bluetooth hands-free system

ECHNOLOGY

BOAR

Select the desired text message.

"Message reader" then after the
audible signal "message received".
"PREVIOUS" or "NEXT" moves

through the list of text messages.
"Read" starts reading of the text
message selected.

Confirm to read the text
message.

Managing text messages

"Read" starts reading of the
message.
"Erase" deletes the message.
"CALL" allows you to contact the
sender of the message.

Deleting all text messages

Activate the main menu.

Select DELETE ALL.

Confirm.

The system asks you to confirm your choice:

Confirm to delete.

To cancel.

"Message reader" then after the
audible signal "Delete all".

The system requests confirmation,
reply with: "Yes" to confirm or "No"
to cancel.

"Message reader" then after the
audible signal "Signal type".
The system lists the options, select

between: "Reader deactivated", "Audio
and visual info" or "Visual info only".

Information settings

Activate the main menu.

Choose the desired option.

During reading of the message:

Activate the main menu.

Select MESS. READER.

Confirm.

Select SIGNAL TYPE.

Confirm to select from the
3 choices available:

- Audio + visual: the system signals the

receipt of a message audibly and visibly
and offers to read it.

- Visual only: reception of a message is

signalled visibly in the instrument panel.

- Off: the text message reader is

deactivated.

Summary of Contents for Boxer

























































































































































































Search results

Summary of Contents for Boxer

Reviews:

Related manuals for Boxer

Brands by name

Popular brands

PEUGEOT Boxer, Handbook

Search results

Summary of Contents for Boxer

Reviews:

Related manuals for Boxer

Brands by name

Popular brands