PEUGEOT Boxer Page 81 Handbook Download

Page: 81 / 184

ECHNOLOGY

on BOAR

Trip computer

The

TRIP

button, located at the end of the

wiper stalk, provides access to the following
information:
-

Ambient temperature

This indicates the temperature outside
the vehicle.

Range

This indicates the distance that can still
be travelled with the fuel remaining in
the tank on the basis of the average
consumption over the last few miles
(kilometres) travelled.

Average speed A

This is the average speed calculated
since the last trip computer zero reset
(with the ignition on).

Trip duration A

This indicates the total time since the
last trip recorder zero reset.

Distance A

This indicates the distance travelled
since the last trip computer zero reset.

Average fuel consumption A

This is the average quantity of fuel
consumed since the last trip computer
zero reset.

Current fuel consumption A

This is the average quantity of fuel
consumed during the last few seconds.

TRIP COMPUTER

If TRIP B is activated on the

MODE

menu:

- Distance

Average fuel consumption B

Average speed B

Trip duration B

Summary of Contents for Boxer

























































































































































































Search results

Summary of Contents for Boxer

Reviews:

Related manuals for Boxer

Brands by name

Popular brands

PEUGEOT Boxer, Handbook

Search results

Summary of Contents for Boxer

Reviews:

Related manuals for Boxer

Brands by name

Popular brands