QUICK HELP
8
Changing a wheel
4. OPERATING PROCEDURE
-
Remove the trim using the screwdriver
F
as a lever.
-
Release the bolts using the
wheelbrace
E
.
-
Position the jack
C
at one of the four
locations provided on the underbody
near the wheels.
3. SPARE WHEEL
The spare wheel retaining bolt is located
below the bumper on the right.
-
Turn the bolt using the socket
A
and the
ratchet wrench
B
to release the wheel.
-
Turn to the locking point, indicated by
an increase in the force required for the
manoeuvre.
-
Take out the spare wheel using the
wrench.
-
Unscrew the handle
G
and remove the
support
H
.
-
Release the spare wheel and place it
near the wheel to be changed.
If you have a retractable foot board, the jack
must be positioned at 45°.
-
Extend the jack using the ratchet
wrench
B
until the wheel is a few
centimetres off the ground.
-
Unscrew the bolts fully and change the
wheel.
Summary of Contents for Boxer
