PEUGEOT BOXER 2018 Handbook Download | Manualshive

Page: 78 / 232

background image

76

Safety

Advice

For the airbags to be fully effective,
observe the safety recommendations
below.

Adopt a normal and upright sitting position.
Fasten your seat belt, ensuring it is positioned
correctly.
Do not leave anything between the occupants
and the airbags (a child, pet, object, etc.), nor
fix or attach anything close to the inflation
trajectory of the airbags; this could cause
injuries during their deployment.
Never modify the original definition of your
vehicle, particularly in the area directly
around the airbags.
After an accident or if the vehicle has been
stolen or broken into, have the airbag systems
checked.
All work on the airbag system must be carried
out by a PEUGEOT dealer or a qualified
workshop.
Even if all of the precautions mentioned
are observed, a risk of injury or of minor
burns to the head, chest or arms when an
airbag is deployed cannot be ruled out. The
bag inflates almost instantly (within a few
milliseconds) then deflates within the same
time discharging the hot gas via openings
provided for this purpose.

Front airbags

Do not drive holding the steering wheel by its
spokes or resting your hands on the centre
part of the wheel.
Passengers must not place their feet on the
dashboard.
Do not smoke as deployment of the airbags
can cause burns or the risk of injury from
a cigarette or pipe.
Never remove or pierce the steering wheel or
hit it violently.
Do not fit or attach anything to the steering
wheel or dashboard, this could cause injuries
with deployment of the airbags.

Lateral airbags

Use only approved covers on the seats,
compatible with the deployment the lateral
airbags. For information on the range of seat
covers suitable for your vehicle, you can
contact a PEUGEOT dealer.
Do not attach anything to or hang anything
from the seat backrests (clothes, etc.) as
this could cause injuries to the thorax or arm
when the lateral airbag is deployed.
Do not sit with the upper part of the body any
nearer to the door than necessary.

Curtain airbags

Do not attach anything to or hang anything
from the roof, as this could cause head
injuries when the curtain airbag is deployed.
If fitted on your vehicle, do not remove the
grab handles installed on the roof, they play
a part in securing the curtain airbags.

«
...
76
77
78
79
80
...
»

Summary of Contents for BOXER 2018









































































































































































































































Reviews:

No comments

Related manuals for BOXER 2018

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: Daihatsu Pages: 41

Brand: Daihatsu Pages: 268

Brand: Feniex Pages: 6

ANDROID INTERFACE

Brand: GMC Pages: 18

Brand: Prorack Pages: 15

Brand: Hama Pages: 40

01 29 9 416 497

Brand: BMW Pages: 5

MAGNUM RT Series

Brand: Raptor Series Pages: 6

Brand: Alfa Romeo Pages: 8

Brand: walser Pages: 24

Brand: Hummer Pages: 502

Brand: CrimeStopper Pages: 1

Brand: v.link Pages: 12

Brand: Joie Pages: 53

Brand: Black+Decker Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands