PEUGEOT BOXER 2018 Handbook Download Page 13

Page: 13 / 232

Dashboard instruments

Warning/indicator lamp

State

Cause

Actions/Comments

Power steering

Fixed, accompanied
by an audible signal
and a message in the
screen.

The power steering has a fault.

The vehicle retains conventional steering without
assistance.
Have it checked by a PEUGEOT dealer or a qualified
workshop.

Front/lateral
airbag

Flashing or fixed.

A fault with an airbag or a seat
belt pretensioner.

Have it checked by a PEUGEOT dealer or a qualified
workshop.
For more information on the

Airbags

, refer to the

corresponding section.

Seat belt not
fastened

Fixed, then flashing.

The driver has not fastened their
seat belt.

Pull the strap then insert the tongue in the buckle.

Accompanied by an
audible signal, then
fixed.

The vehicle is moving with the
driver's seat belt unfastened.

Check that the seat belt is fastened correctly by pulling
the strap.

Pneumatic
suspension

Fixed.

There is a fault with the system.

Have it checked by a PEUGEOT dealer or a qualified
workshop.

Parking brake

Fixed.

The parking brake is applied or
not properly released.

Release the parking brake to switch off the warning
lamp, keeping your foot on the brake pedal.

Brake fluid level

Fixed.

The fluid level is too low.

Top up with a fluid approved by PEUGEOT.

Fixed, although the
level is correct.

You must stop as soon as it is safe to do so.
Park, switch off the ignition and call a PEUGEOT
dealer or a qualified workshop.

Summary of Contents for BOXER 2018









































































































































































































































Search results

Summary of Contents for BOXER 2018

Reviews:

Related manuals for BOXER 2018

Brands by name

Popular brands

PEUGEOT BOXER 2018, Handbook

Search results

Summary of Contents for BOXER 2018

Reviews:

Related manuals for BOXER 2018

Brands by name

Popular brands