149
8
In the event of a breakdown
Third brake lamp
Type A
, W5W – 5W (x 4)
F
Remove the two lamp fixing screws.
F
Remove the lamp by pulling it towards you.
F
Remove the bulb holder by squeezing the
two tongues inwards.
F
Remove the failed bulb by pulling it out.
F
Change the bulb.
Changing a fuse
The three fuseboxes are located on the
dashboard on the left-hand side, in the pillar
on the right-hand side and in the engine
compartment.
The designations provided are only for the
fuses that can be replaced by the user. For
any other work, visit a PEUGEOT dealer or
a qualified workshop.
Professional repairers: for full information
on the fuses and relays, consult the
wiring information and diagrams via the
PEUGEOT dealer network.
Removing and fitting a fuse
PEUGEOT accepts no responsibility for
the cost incurred in repairing your vehicle
or for rectifying malfunctions resulting
from the installation of accessories not
supplied by and not recommended by
PEUGEOT and not installed in accordance
with its specifications, in particular when
the combined power consumption of all
of the additional equipment connected
exceeds 10 milliamperes.
Good
Failed
Before changing a fuse, the cause of the fault
must be found and rectified. The numbers of
the fuses are indicated on the fusebox.
Always replace a faulty fuse with a fuse of
the same rating.
Summary of Contents for BOXER 2018
