manualshive.com logo in svg

PEUGEOT BOXER 2018, Handbook

The PEUGEOT BOXER 2018 handbook is your complete guide to efficiently operate this iconic commercial vehicle. This comprehensive manual provides valuable instructions and essential information, ensuring smooth handling and optimal performance. Download this must-have resource for free at manualshive.com, and conquer the road with confidence.

Share
Download
background image

7

.

Audio system

To ensure that your voice commands are 
always recognised by the system, we 
recommend that you follow the advice 
below:
-  speak in a normal tone,
-  always wait for the "beep" (audible 

signal) before speaking,

-  the system is able to recognise the 

voice commands delivered, regardless 
of gender, tone and inflexion of the 
voice of the person speaking,

-  keep the noise level inside the 

passenger compartment as low as 
possible,

-  ask the other passengers not to 

speak before you use the voice 
commands. As the system recognises 
voice commands whatever is said, 
when more than one person speaks 
at the same time, it is possible that 
the system will recognise different 
or additional commands to the one 
intended,

-  for best operation, it is recommended 

that the windows and sunroof (for 
models/markets where it is available) 
be closed to avoid interference from 
outside noise.

Steering wheel mounted controls

This button switches on the 
"Telephone" voice recognition 
mode, which makes it possible to 
start calls, view the log of recent/
received/made calls, display 
contacts, etc.

This button switches on the "Radio/
Media" voice recognition mode, 
which makes it possible to tune 
to a specific radio station radio or 
specific AM/FM radio frequency, 
play a track or an album on a USB 
memory stick/iPod/MP3 CD.

Voice interaction can be quickly used if 
these buttons are pressed during a voice 
message from the system; it allows 
a voice command to be issued directly.
For example, if the system is speaking 
a voice help message and if you know 
the command to give the system, by 
pressing these buttons, the voice 
message is interrupted and the desired 
voice command can be spoken directly (so 
avoiding the need to listen to the complete 
voice help message).
When the system is waiting for a voice 
command from the user, pressing these 
buttons closes the voice session.

Every time a button is pressed, a "beep" 
(audible signal) is produced and the 
screen displays a page of suggestions 
asking the user to speak a command.

Summary of Contents for BOXER 2018









































































































































































































































Reviews:

No comments

Related manuals for BOXER 2018

Jeep Wrangler 2011 Owner'S Manual preview
Wrangler 2011
Brand: Jeep Pages: 603
Jeep Patriot 2011 User Manual preview
Patriot 2011
Brand: Jeep Pages: 80
Fab Fours BLACK STEEL S2560 Installation Instructions Manual preview
BLACK STEEL S2560
Brand: Fab Fours Pages: 9
Subaru SPLASH GUARD Installation Manual preview
SPLASH GUARD
Brand: Subaru Pages: 3
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
Pyle PLDCP3 User Manual preview
PLDCP3
Brand: Pyle Pages: 2
Hyundai Entourage 2008 Quick Reference Manual preview
Entourage 2008
Brand: Hyundai Pages: 11
Saab 32 025 603 Installation Instructions Manual preview
32 025 603
Brand: Saab Pages: 15
Thule 1809 Instruction Manual preview
1809
Brand: Thule Pages: 4
Mazda 2010 MX-5 Miata Specification preview
2010 MX-5 Miata
Brand: Mazda Pages: 8
Toyota RAV-4 2015 Series Owner'S Manual Supplement preview
RAV-4 2015 Series
Brand: Toyota Pages: 50
Audi Audi 80 1987 Workshop Manual preview
Audi 80 1987
Brand: Audi Pages: 63
Thule 1597 Instructions preview
1597
Brand: Thule Pages: 4
Roadmaster 195125 Assembly And Operating Instructions preview
195125
Brand: Roadmaster Pages: 4
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
Aston Martin V8 Vantage Workshop Manual preview
V8 Vantage
Brand: Aston Martin Pages: 415
Audiovox Prestige 128-8602 Installation Manual preview
Prestige 128-8602
Brand: Audiovox Pages: 8

Brands by name

Popular brands

Load more brands