PEUGEOT BOXER 2018, Handbook

Page: 144 / 232

142
In the event of a breakdown
Screw in the bolts in this order.
F
Put the spare wheel in place, making
the 2 openings
M coincide with the
2 corresponding pins
N .
F
Start screwing in the bolts by hand.
F
Pretighten the bolts using the wheelbrace D
and the bar B .
F
Lower the vehicle using the wheelbrace D
and the bar B , then remove the jack.
F
Tighten the bolts again using the
wheelbrace D and the bar B .
If your vehicle has tyre under-inflation
detection, check the tyre pressures and
reinitialise the system.
5 - Put away the wheel to be
repaired
You must always place the wheel to be repaired
or the spare wheel under the vehicle to secure
the carrier system.
Check that it is properly secured in its
compartment below the floor.
If the wheel is not correctly in position, it
could be dangerous.
F
Replace the wheel at the rear of the vehicle.
Have the tightness of the bolts and the
pressure of the spare wheel checked by
a member of the dealer network or a qualified
workshop without delay.
Have the punctured wheel repaired and
replace it on the vehicle as soon as possible.