PEUGEOT 508 Handbook Download Page 282

Page: 282 / 340

280

AUDIO STREAMING

Streaming allows audio

les on your telephone to be played via the

vehicle's speakers.

Connect the telephone: see "USING THE TELEPHONE".
Select "

Audio

" or "

All

" pro

le.

If play does not start automatically, it may be necessary to start the

audio playback from the telephone.
Control is from the peripheral device or by using the audio system

buttons.

Once connected in streaming mode, the telephone is considered to be

a media source.
It is recommended that you activate "

Repeat

" on the Bluetooth

peripheral.

MUSIC MEDIA PLAYERS

CONNECTING APPLE

PLAYERS

Connect the Apple

player to the USB port using a suitable cable (not

supplied).
Play starts automatically.

Control is via the audio system.

The classi

cations available are those of the portable device

connected (artists/albums/genres/playlists/audiobooks/podcasts).
The default classi

cation used is by artist. To modify the classi

cation

used, return to the

rst level of the menu then select the desired

classi

cation (playlists for example) and con

rm to go down through

the menu to the desired track.

The version of software in the audio system may not be compatible

with the generation of your Apple

player.

The list of devices compatible with software versions is available from

PEUGEOT dealers.

Summary of Contents for 508





















































































































































































































































































































































Search results

Summary of Contents for 508

Reviews:

Related manuals for 508

Brands by name

Popular brands

PEUGEOT 508, Handbook

Search results

Summary of Contents for 508

Reviews:

Related manuals for 508

Brands by name

Popular brands