PEUGEOT 508 Handbook Download Page 244

Page: 244 / 340

242

02 STEERING MOUNTED CONTROLS

- Press: access to the instrument

panel screen menu.

Rotation: navigation in the

instrument panel screen menu.

- Increase volume.

- Mute/restore sound.

Decrease volume.

Rotation

Radio -automatic selection of

next/previous frequency.

Media:

previous/next track.

- Press then rotation: access to

6 preset stations.

Change the audio source.

- TEL/SRC button (short press):

Accept an incoming call

Call in progress: access to

telephone menu: hang up, secret

mode, hands-free mode.

- TEL/SRC button (long press):

Reject an incoming call or end a

call in progress.

When not making a call, access

to the telephone menu (Dial,

Contacts, Calls log, Voice mailbox).

Select the type of permanent

display on the screen.

Radio: display the list of stations.

Media:

display the list of tracks.

Summary of Contents for 508





















































































































































































































































































































































Search results

Summary of Contents for 508

Reviews:

Related manuals for 508

Brands by name

Popular brands

PEUGEOT 508, Handbook

Search results

Summary of Contents for 508

Reviews:

Related manuals for 508

Brands by name

Popular brands