PEUGEOT 508, Handbook

Page: 180 / 340

178
!
Practical information
2. In fl ation
) Turn the selector A to the "air"
position.
) Uncoil the black pipe H fully.
) Connect the black pipe to the
valve of the wheel.
) Connect the compressor's electric plug to
the vehicle's 12 V socket.
) Start the vehicle again and leave the
engine running.
) Adjust the pressure using the compressor
(to inflate: switch
B in position "I" ;
to deflate: switch B in position "O" and
press button C ), in accordance with the
vehicle's tyre pressure label (located on the
left hand door aperture).
A loss of pressure indicates that the
puncture has not been fully plugged;
contact a PEUGEOT dealer or qualified
workshop for assistance.
) Remove and stow the kit.
) Drive at reduced speed (50 mph [80 km/h]
max) limiting the distance travelled to
approximately 120 miles (200 km).
)
Visit a PEUGEOT dealer or a
qualified workshop as soon as
possible.
You must inform the technician
that you have used this kit. After
inspection, the technician will
inform you whether the tyre can be
repaired or must be replaced.