PEUGEOT 508 Handbook Download Page 45

Page: 45 / 340

Access

Unlocking the boot

Using the remote control

)

Press this button to unlock the

vehicle and open the boot.

Using the electronic key

)

With the electronic key in the defined zone,
press button

(Saloon) or lift lever

(SW)

to unlock the vehicle and open the boot.

Boot only function activated

This is set in the instrument panel
configuration menu.

This function is deactivated by default.

)

use of the remote control or the electronic

key then unlocks and/or opens only the
boot.

Don't forget to lock your boot
afterwards.

Summary of Contents for 508





















































































































































































































































































































































Search results

Summary of Contents for 508

Reviews:

Related manuals for 508

Brands by name

Popular brands

PEUGEOT 508, Handbook

Search results

Summary of Contents for 508

Reviews:

Related manuals for 508

Brands by name

Popular brands