PEUGEOT 508 Handbook Download Page 10

Page: 10 / 340

Familiarisation

Lighting of the indicator lamp indicates the state
of the corresponding function.

Switch panels

Opening the boot.

Opening the fuel filler flap.

54, 55

Massage.

Alarm.

Programmable heating warning lamp.

Electric parking brake.

Starting/stopping using the electronic
key.

Deactivation of Stop & Start.

118

Head-up display (on/off, settings).

121

Deactivation of parking sensors.

129

Parking space sensor.

130

Electric child lock.

160

Deactivation of the DSC/ASR system.

166

Adaptive lighting.

138

Summary of Contents for 508





















































































































































































































































































































































Search results

Summary of Contents for 508

Reviews:

Related manuals for 508

Brands by name

Popular brands

PEUGEOT 508, Handbook

Search results

Summary of Contents for 508

Reviews:

Related manuals for 508

Brands by name

Popular brands