PEUGEOT 508, Handbook

Page: 185 / 340

8
183
i
Practical information
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not
block traffic: the ground must be level,
stable and not slippery.
Apply the parking brake unless it has
been programmed to automatic mode,
switch off the ignition and engage first
gear * to block the wheels.
Check that the braking warning lamp
and the
P warning lamp in the parking
brake control lever come on.
The occupants must get out of the
vehicle and wait where they are safe.
Never go underneath a vehicle raised
using a jack; use an axle stand.
List of operations
)
Remove the bolt cover from each of
the bolts using the tool 3 (according to
equipment).
) Fit the security socket 4 on the
wheelbrace 1 to slacken the security bolt
(if fitted).
) Slacken the other bolts using the
wheelbrace 1 only.
* position R for the electronic gear control
gearbox; P for the automatic gearbox.