PETIT auto wash Accutrac 360-t, Installation Manual

Page: 26 / 32

Petit Auto Wash Inc.
360-t Installation Manual www.PetitAutoWash.com P a g e | 26
Accutrac 360-t Tunnel
3.2. Appendix B: I/O & Circuit Breaker Lists
Cable
Color
Input Card
Wire Color
Input/
Wire # Description
white 1000 E-Stop ok, 360 Control Panel Door
brown 1001 Remote E-Stop ok Optional, If not used jumper to 24VDC(+)
green 1002 Machine Reset, 360 Control Panel Door
yellow 1003 Home Prox Made
grey 1004 Exit Prox Made
pink 1005 Entrance Prox Made
blue 1006 SPARE
red 1007 Bridge PE-1 clear (A Freq)
black 1008 Bridge PE-2 clear (B Freq)
violet 1009 DS Trolley Retracted
grey/pink 1010 DS Trolley Extended
red/blue 1011 DS Impact Sensor Top not ok (Left/Right)
white/green 1012 DS Impact Sensor Bottom not ok (Front/Rear)
brown/green 1013 PS Trolley Retracted
white/yellow 1014 PS Trolley Extended
yellow/brown 1015 PS Impact Sensor Top not ok (Left/Right)
white 1016 PS Impact Sensor Bottom not ok (Front/Rear)
brown 1017 SPARE
green 1018 Profile XP-1 clear (B Freq) (Bottom)
yellow 1019 Profile XP-2 clear (A Freq)
grey 1020 Profile XP-3 clear (B Freq)
pink 1021 Profile XP-4 clear (A Freq) (Top) If no Top Washer, Jumper to 24VDC(+)
blue 1022 Pulse Switch (From Tunnel Controller Input/ Pulse Switch) Isolation Relay (*)
red 1023 Entrance Photo-Eye (From Tunnel Controller Input/ Photo Eye) Isolation Relay (*)
black 1024 Conveyor Running (From Tunnel Controller Output/ Conv motor starter)Isolation Relay (*)
violet 1025 Start 360 Extend & Enable (From Tunnel Controller Output) Isolation Relay (*)
grey/pink 1026 Start Top HP Pump & Top Oscillator (From Tunnel Controller Output) Isolation Relay (*)
red/blue 1027 Start Side HP Pump & Side Oscillators (From Tunnel Controller Output)Isolation Relay (*)
white/green 1028 Machine Reset, Remote Button (Optional) Isolation Relay (*)
brown/green 1029 SPARE (Prior to 9/2015, Remote E-stop) Isolation Relay (*)
white/yellow 1030 Rear Obstacle Avoidance (Optional) (From Tunnel Controller Output) Isolation Relay (*)
yellow/brown 1031 MCR (Master Control Rly) Monitor
(*) NOTE : Isolation Relay Coils are 24VDC. Other voltages available upon request.
INPUTS, 360-t Tunnel
PLC Inputs are 24VDC(+)