Petit Auto Wash Inc.
360-t Installation Manual
www.PetitAutoWash.com
P a g e
|
25
Accutrac 360-t Tunnel
•
Carefully cut away the metal shielding. Cut away from the center of the cable, barely grazing the
metal shielding with the cutters. Remove the metal shielding.
Note: This step is where most nicking of wires occurs.
•
At the
VERY END
of the cable, cut into the inner white shielding to find the orange pull string. Cut up
and away from the wires. Use the pull string to strip back the inner insulation. Carefully cut away the
inner insulation, again cutting away from the wires. If damaged, cut back 1-2 inches off of the end
of the cable.
