Permobil C350 Owner'S Manual Download

Page: 33 / 112

Owner´s Manual Permobil C350

Design and Function (VR2)

VR2 Control Panel

Power Switch,

On/Off

Button to power up and power down the wheelchair. This button must be

pressed for the chair to operate.

WARNING

Do not use the Power Switch Button to stop the wheelchair unless there is an emergency.

If you do, you may get thrown out of the chair or shorten the life of the wheelchair drive components.

Warning Horn

Press the button to sound the horn and attract attention.

Hazard Warning Button and LED

This button activates/deactivates the wheelchairs hazards lights. this function is

used when the wheelchair is positioned in a way making it a obstruction for others.

Push the button to activate the hazard lights and push it again to deactivate them.

When activated the indicator LED will flash in sync with the wheelchair’s indicators.

Lights Button*)

This button activates/deactivates the wheelchair lights. Push the button to activate

the lights and push it again to deactivate them. When the lights are activated the

light LED lights up too.

Maximum Speed Buttons

These buttons decrease/increase the maximum speed setting. In special

circumstances, the drive electronics can be programmed to use Profiles. When

Profiles are programmed, these buttons allow the user to change the profile of

the control system, instead of adjusting the maximum speed.

Seat Function Button**)

If the wheelchair is fitted with seat actuators, this button will enter and exit actua-

tor adjustment mode.

Turning Indicator Buttons*)

This buttons activates and deactivates the wheelchair’s left/right indicator. Depress

the button to turn the indicator on and depress the button again to turn it off. When

activated the indicator LED will flash in sync with the wheelchair’s indicators.

Only on wheelchairs with lights.

**) Only on wheelchairs with electric seat functions.

Summary of Contents for C350

















































































































Search results

Summary of Contents for C350

Reviews:

Related manuals for C350

Brands by name

Popular brands

Permobil C350, Owner'S Manual

Search results

Summary of Contents for C350

Reviews:

Related manuals for C350

Brands by name

Popular brands