manualshive.com logo in svg

PerkinElmer QuantaSmart 1694267, Reference Manual

Share
Download
PerkinElmer QuantaSmart 1694267 Reference Manual Download Page 145

 

ADVANCED FEATURES  

 PerkinElmer Life and Analytical Sciences

135 

Chapter 8

Advanced Features  

Priostat

Priostat allows you direct control over several sample analysis features. Two 

different types of Priostat counting are available:

Group Priostat

This method allows you to count a set of high priority samples immediately, while 

temporarily interrupting the current protocol. Group Priostat allows you to select 

any existing assay for the purpose of data reduction.

To use this feature:

1. Load the samples into cassettes and attach the Priostat flag to the first 

cassette to be counted.

2. Select Group Priostat from the Run menu. The Associate assay for Priostat 

window is displayed. 

3. Select the assay you would like to use to count the samples.

Note: The interrupted protocol number cannot be selected to count 

the Group Priostat samples.

The instrument will search for the Priostat flag and begin counting the samples. 

Once the Group Priostat samples are counted, the instrument automatically 

resumes executing the interrupted protocol with the sample it was counting when 

the Group Priostat counting commenced. The results of the Group Priostat 

counting will be displayed in the Output window.

4. Print the results of the Group Priostat results by selecting the print icon in the 

Output window.

Note:To end the Group Priostat protocol prior to counting all of the 

samples, select End Group Priostat from the Run menu.

Summary of Contents for QuantaSmart 1694267



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands