PerkinElmer QuantaSmart 1694267, Reference Manual

Page: 120 / 218

CHAPTER 6
110 PerkinElmer Life and Analytical Sciences
Sample Nuclides Library
The Sample Nuclides window allows you to enter information into and retrieve
information from the Sample Nuclides Library.
Figure 6-1 Sample Nuclides Library Window
For assays, use the Sample Nuclides Library to define and save nuclide names and
counting region limits for radionuclides. You can also select a quench set for each
sample nuclide using the Quench Set buttons in this window.
In Replay, use the Sample Nuclide Library to select a radionuclide for the purpose
of reanalyzing sample data.
Note: The fields that are enabled in the Sample Nuclides Library
will be different when accessed from different locations within the
software. The list of nuclides that is displayed is dependent on the
assay type, the nuclide and the number of quench sets associated
with the nuclide.
Nuclide Name
Select the appropriate nuclide(s) for your assay from the list and click OK. If you
would like to define a different nuclide, click the Add button and type the name of
the nuclide you would like to count. Define the parameters in the fields displayed
in the new row in the table and click OK. To delete a nuclide from the list, select
that nuclide, click the Delete button and click OK.
A:LL - Lower Limit Region A
This field represents the lower counting limit for region A, measured in keV.