PerkinElmer QuantaSmart 1694267, Reference Manual

Page: 110 / 218

CHAPTER 5
100 PerkinElmer Life and Analytical Sciences
Output per Sample and/or Average
Select Sample and/or Average to indicate the type of data to be included in the
output. Average allows the data file to contain one line of data for each average
data line in the output window. Sample allows the data file to contain one line of
data for each sample data line in the output window. Checking both Sample and
Average allows the data file to contain one line of data for each average data line
and one line of data for each sample data line.
Include Column Header
Check this box if you want headers included at the beginning of the data file for
each data field.
Include Assay Definition Block Data
Check this box if you want the Block Data information included in the data file
output.
RS-232
Check this to allow QuantaSmart to transmit lines of sample data via the RS-232
port.
Choose either Output per: Sample and/or Average.
Output per Average: allows QuantaSmart to transmit one line of data for each
average data line in the output window.
Output per Sample: allows QuantaSmart to transmit one line of data for each
sample data line in the output window.
The default selection is Sample.
Additional Data
Mark the appropriate check boxes for additional information that you would like
included in the RS-232 output. You can choose any combination of the following
three data items as desired.
2800/2900/3100
Format
2500/2700
Format
2100/2300
Format
Protocol Data Before First Sample Before First Sample
Before First Sample
(after Spectrum
Data, if enabled.
Spectrum Data After All Samples After All Samples Before Each Sample
Column Headers Before First Sample Before First Sample Before First Sample