PerkinElmer Lambda XLS User Manual Download Page 79

Page: 79 / 90

Accessories . 79

Lambda Bio/XLS Print Utility

There are two software applications comprising the Lambda Bio/XLS Print Utility.

The Lambda Bio/XLS Report Utility is an application running separately under Windows XP

that enables you to connect via a USB cable to a PC onto which the software has been

installed. You can connect to several instruments simultaneously. Once your data is on the

PC it can be printed directly to any printer that is connected to that PC or saved. The Report

Utility can save data as an Enhanced Metafile (.emf) graphics file, a comma delimited (.csv)

data file, a tab delimited (.txt) data file or as an Excel file, or in print utility (.pvc) format for

viewing using the Lambda Bio/XLS Report Viewer.

NOTE: An internal printer is also available for the instrument. This is either supplied

pre-installed in the instrument or as an optional accessory (L7110230).

If you have this option, please see the

Lambda Bio/XLS Print Utility User’s Guide

(L6050015)

on the

Lambda Bio/XLS User Manuals CD

(L6050018) for more information.

Summary of Contents for Lambda XLS



























































































Search results

Summary of Contents for Lambda XLS

Reviews:

Related manuals for Lambda XLS

Brands by name

Popular brands

PerkinElmer Lambda XLS, User Manual

Search results

Summary of Contents for Lambda XLS

Reviews:

Related manuals for Lambda XLS

Brands by name

Popular brands