EAC12
4
PEREL
7. Problems & Suggestions
PROBLEM
CAUSE
SOLUTION / SUGGESTION
Device is not plugged in
Connect the device to the mains
Fault in plug, wire or socket
Check (and replace) plug, wire or socket
The device does not work
Fuse blown
Bring the device to your dealer for a new fuse
End of set timer / temperature is reached
This is perfectly normal
E3 error code on LCD: air filter
Clean the air filter
The device stops operating
E4 error code on LCD: water
Empty the water tank
(see "
6. Accessories
& Maintenance
")
Room temperature is lower than set temp. This is perfectly normal
No cold air in cooling mode
No cool air in dehumidifying mode
There is frost on the evaporator
Device is defrosting. Unit will work after
defrosting is done
8. Electric Circuit
The information in this manual is subject to change without prior notice.
