manualshive.com logo in svg

Pepwave BR1 ENT, User Manual, Page: 80 / 206

Share
Download
Pepwave BR1 ENT User Manual Download Page 80

 

 

When 

​

Disabled

​

 is chosen in the 

​

Method

​

 field, the WAN connection will always be considered as up. The 

connection will 

​

NOT 

​

be treated as down in the event of IP routing errors.

 

Health Check Method: PING

 

 

ICMP ping packets will be issued to test the connectivity with a configurable target IP address or hostname. A WAN 
connection is considered as up if ping responses are received from either one or both of the ping hosts.

 

PING Hosts

 

This setting specifies IP addresses or hostnames with which connectivity is to be tested via 
ICMP ping. If 

​

Use first two DNS servers as Ping Hosts

​

 is checked, the target ping host 

will be the first DNS server for the corresponding WAN connection. Reliable ping hosts with 
a high uptime should be considered. By default, the first two DNS servers of the WAN 
connection are used as the ping hosts.

 

Health Check Method: DNS Lookup

 

 

DNS lookups will be issued to test connectivity with target DNS servers. The connection will be treated as up if DNS 
responses are received from one or both of the servers, regardless of whether the result was positive or negative.

 

Health Check 

DNS Servers

 

This field allows you to specify two DNS hosts’ IP addresses with which connectivity is to be 
tested via DNS lookup.

 

If 

​

Use first two DNS servers as Health Check DNS Servers

​

 is checked, the first two DNS 

servers will be the DNS lookup targets for checking a connection's health. If the box is not 
checked, 

​

Host 1

​

 must be filled, while a value for 

​

Host 2

​

 is optional.

 

If 

​

Include public DNS servers

​

 is selected and no response is received from all specified 

DNS servers, DNS lookups will also be issued to some public DNS servers. A WAN 
connection will be treated as down only if there is also no response received from the public 
DNS servers.

 

Connections will be considered as up if DNS responses are received from any one of the 
health check DNS servers, regardless of a positive or negative result. By default, the first 
two DNS servers of the WAN connection are used as the health check DNS servers.

 

Health Check Method: HTTP

 

 

HTTP connections will be issued to test connectivity with configurable URLs and strings to match.

 

 

http://www.peplink.com 

80 

  Copyright @ 2017 Pepwave 

 

Summary of Contents for BR1 ENT















































































































































































































Reviews:

No comments