Pepwave BR1 ENT, User Manual

Page: 132 / 206

PPTP. For greater security, we recommend you connect using L2TP with IPsec.
Preshared Key
Enter your preshared key in the text field. Please note that remote devices will need this
preshared key to access the Balance.
Listen On
This setting is for specifying the WAN IP addresses where the PPTP server of the router
should listen on.
Connect to
Network
Select the VLAN network for remore users to enable remote user access on.
Authentication
Determine the method of authenticating remote users.
User Accounts
This setting allows you to define the PPTP User Accounts. Click Add to input username and
password to create an account. After adding the user accounts, you can click on a
username to edit the account password. Click the button X to delete the account in its
corresponding row.
Click the button to switch to enters user accounts by pasting the information in.CSV
format.
Miscellaneous Settings
The miscellaneous settings include configuration for high availability, PPTP server, service
forwarding, and service passthrough.
21.1 High Availability
Many Pepwave routers support high availability (HA) configurations via an open standard
virtual router redundancy protocol (VRRP, RFC 3768). In an HA configuration, two Pepwave
routers provide redundancy and failover in a master-slave arrangement. In the event that the
master unit is down, the slave unit becomes active. High availability will be disabled
automatically where there is a drop-in connection configured on a LAN bypass port.
http://www.peplink.com 132 Copyright @ 2017 Pepwave