Pepwave BR1 ENT, User Manual

Page: 146 / 206

Multicast Filter ​ A
This setting enables the filtering of multicast network traffic to the wireless SSID.
Multicast Rate ​ A
This setting specifies the transmit rate to be used for sending multicast network
traffic. The selected
​ Protocol ​ and ​ Channel Bonding ​ settings will affect the rate
options and values available here.
IGMP Snooping
​ A
To allow the Pepwave router to ​ listen to internet group management protocol (IGMP)
network traffic, select this option.
DHCP Option 82 ​ A
If you use a distributed DHCP server/relay environment, you can enable this option to
provide additional information on the manner in which clients are physically
connected to the network.
Network Priority
(QoS)
​ A
Select from ​ Gold ​ , ​ Silver ​ , and ​ Bronze ​ to control the QoS priority of this wireless
network’s traffic.
Layer 2 Isolation ​ A
Layer 2
​
refers to the second layer in the ISO Open System Interconnect model.
When this option is enabled, clients on the same VLAN, SSID, or subnet are isolated
to that VLAN, SSID, or subnet, which can enhance security. Traffic is passed to
upper communication layer(s). By default, the setting is disabled.
Maximum Number
of Clients
Indicate the maximum number of clients that should be able to connect to each
frequency.
Band Steering ​ A
Band steering allows the Pepwave router to steer AP clients from the 2.4GHz band to
the 5GHz band for better usage of bandwidth. To make steering mandatory, select
Enforce ​ . To cause the Pepwave router to preferentially choose steering, select
Prefer ​ . The default for this setting is ​ Disable ​ .
A
​
- Advanced feature. Click the button on the top right-hand corner to activate.
Security Settings
Security
Policy
This setting configures the wireless authentication and encryption methods. Available
options are
​ Open (No Encryption) ​ , ​ WPA/WPA2 - Personal ​ , ​ WPA/WPA2 – Enterprise
and
​
Static WEP
​
.
http://www.peplink.com 146 Copyright @ 2017 Pepwave