manualshive.com logo in svg

Pepwave BR1 ENT, User Manual, Page: 63 / 206

Share
Download
Pepwave BR1 ENT User Manual Download Page 63

 

 

PPPoE Settings

 

Routing Mode

 

NAT allows substituting the real address in a packet with a mapped address that is 
routable on the destination network. By clicking the help icon in this field, you can 
display the 

​

IP Forwarding

​

 option, if your network requires it.

 

IP Address / 

Subnet Mask / 

Default Gateway

 

This information is obtained from the ISP automatically.

 

PPPoE User 

Name / Password

 

Enter the required information in these fields in order to connect via PPPoE to the 
ISP. The parameter values are determined by and can be obtained from the ISP.

 

Confirm PPPoE 

Password

 

Verify your password by entering it again in this field.

 

Service Name 

(Optional)

 

Service name is provided by the ISP.

 

Note: Leave this field blank unless it is provided by your ISP. 

 

IP Address 

(Optional)

 

If your ISP provides a PPPoE IP address, enter it here.

 

Note: Leave this field blank unless it is provided by your ISP. 

 

DNS Servers

 

Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies 
the DNS (Domain Name System) servers to be used when a DNS lookup is routed 
through this connection. Selecting 

​

Obtain DNS server address automatically

​

 results 

in the DNS servers being assigned by the WAN DHCP server to be used for outbound 
DNS lookups over the connection. (The DNS servers are obtained along with the 

 

http://www.peplink.com 

63 

  Copyright @ 2017 Pepwave 

 

Summary of Contents for BR1 ENT















































































































































































































Reviews:

No comments