manualshive.com logo in svg

Pepwave BR1 ENT, User Manual, Page: 49 / 206

Share
Download
Pepwave BR1 ENT User Manual Download Page 49

 

Static Route

 

This table is for defining static routing rules for the LAN segment. A static route consists of 
the network address, subnet mask, and gateway address. The address and subnet mask 
values are in 

​

w.x.y.z

​

 format.

 

The local LAN subnet and subnets behind the LAN will be advertised to the VPN. Remote 
routes sent over the VPN will also be accepted. Any VPN member will be able to route to 
the local subnets. Press 

 to create a new route. Press 

 to remove a route.

 

 

 

 

WINS Server Settings

 

Enable

 

Check the box to enable the WINS server. A list of WINS clients will be displayed at 

Status>WINS Clients

​

.

 

 

 

 

DNS Proxy Settings

 

Enable

 

To enable the DNS proxy feature, check this box, and then set up the feature at 

Network>LAN>DNS Proxy Settings

​

. A DNS proxy server can be enabled to 

serve DNS requests originating from LAN/PPTP/SpeedFusion

​

TM 

​

peers. Requests 

are forwarded to the 

​

DNS servers/resolvers

​

 defined for each WAN connection.

 

DNS Caching

 

This field is to enable DNS caching on the built-in DNS proxy server. When the 
option is enabled, queried DNS replies will be cached until the records’ TTL has 
been reached. This feature can help improve DNS lookup time. However, it 
cannot return the most up-to-date result for those frequently updated DNS 

 

http://www.peplink.com 

49 

  Copyright @ 2017 Pepwave 

 

Summary of Contents for BR1 ENT















































































































































































































Reviews:

No comments