Pepwave BR1 ENT, User Manual

Page: 171 / 206

SMTP Port
This field is for specifying the SMTP port number. By default, this is set to ​ 25 ​ ; when ​ SSL
Encryption
​
is checked, the default port number will be set to
​
465
​
. You may customize the
port number by editing this field. Click ​ Default ​ to restore the number to its default setting.
SMTP User
Name /
Password
This setting specifies the SMTP username and password while sending email. These
options are shown only if
​ Require authentication ​ is checked in the ​ SMTP Server ​ setting.
Confirm SMTP
Password
This field allows you to verify and confirm the new administrator password.
Sender’s Email
Address
This setting specifies the email address the Pepwave router will use to send reports.
Recipient’s
Email Address
This setting specifies the email address(es) to which the Pepwave router will send email
notifications. For multiple recipients, separate each email addresses using the enter key.
After you have finished setting up email notifications, you can click the ​ Test Email
Notification ​ button to test the settings before saving. After ​ Test Email Notification ​ is clicked,
you will see this screen to confirm the settings:
Click ​ Send Test Notification ​ to confirm. In a few seconds, you will see a message with
detailed test results.
http://www.peplink.com 171 Copyright @ 2017 Pepwave