manualshive.com logo in svg

Pepwave BR1 ENT, User Manual, Page: 155 / 206

Share
Download
Pepwave BR1 ENT User Manual Download Page 155

 

No. of APs

 

This pie chart and table indicates how many APs are online and how many are offline. 

 

No.of Clients

 

This graph displays the number of clients connected to each network at any given time. 
Mouse over any line on the graph to see how many clients connected to a specific SSID 
for that point in time.

 

Data Usage

 

This graph enables you to see the data usage of any SSID for any given time period. 
Mouse over any line on the graph to see the data usage by each SSID for that point in 
time. Use the buttons next to 

​

Zoom

​

 to select the time scale you wish to view. In addition, 

you could use the sliders at the bottom to further refine your timescale.

 

 

 

Events

 

This event log displays all activity on your AP network, down to the client level. Click 

​

View Alerts

​

 to see only alerts, 

and click the 

​

More…

​

 link for additional records.

 

 

23.2

Access Point (Usage)

 

A detailed breakdown of data usage for each AP is available at 

​

AP > Controller Status > 

Access Point

​

.

 

 

http://www.peplink.com 

155 

  Copyright @ 2017 Pepwave 

 

Summary of Contents for BR1 ENT















































































































































































































Reviews:

No comments