2
016-
10
38
PROFIBUS Power Hub Segment Coupler 3 (SK3)
Operation
Figure 6.1
Functional overview of dialogs
6.3.1
Brief Introduction to DTM with PACTware
TM
(Example)
The gateway has an integrated slave (built-in slave or "BIS
“
) with a DP address that can be
configured with the DIP switch on the motherboard. As a device participating in cyclic data
exchange, the BIS returns function monitoring and diagnostic data to the master.
Connecting the DTM to the HD2-GTR-4PA
Ensure that all settings are made correctly (device address, etc.)
1. Right-click in the project tree on
HD2-GTR-4PA
.
2. Select
Connect
.
A hash (#) next to the device icon in the project tree indicates that the connection exists.
Opening the Offline Dialog
In order to open the Offline dialog, proceed as follows:
1. Right-click in the project tree on
HD2-GTR-4PA
.
2. Select
Parameters > Offline Parameterization
.
Opening the Online Dialog
Ensure that the HD2-GTR-4PA is connected.
In order to open the Online dialog, proceed as follows:
1. Right-click in the project tree on
HD2-GTR-4PA
.
2. Select
Parameters > Online Parameterization
.
Opening the Diagnostics Dialog
Ensure that the HD2-GTR-4PA is connected.
In order to open the Diagnostics dialog, proceed as follows:
1. Right-click in the project tree on
HD2-GTR-4PA
.
2. Select
Diagnostics
.
Field device
Offline
dialog
Online
dialog
load
o
nload
Dir
ec
t c
onnec
tion
Diagnostics
dialog
Diagnostics only
