PROFIBUS Power Hub Segment Coupler 3 (SK3)
PROFIBUS Commissioning
2
016-
10
33
8. Drag the
HD2-GTR-4PA
into the project window into the
PROFIdtm DPV1
node. The
window
Add station address
appears.
9. Enter the station address (BIS address of the gateway) and confirm with
OK
.
Your project tree now looks like this:
Entering the Assigned Built-In Slave Address in the DTM
In order to enter the built-in slave address that was assigned on the gateway motherboard into
the DTM, proceed as follows:
1. Right-click on
PROFIdtm DPV1
in the project tree and choose
Additional Functions > Edit
DTM Station Addresses
.
2. Enter the BIS address set on the gateway motherboard and confirm with
Apply
.
Note!
Sometimes, the FDT application does not immediately display the address change in the
project window, even though the change has been made. If that happens, save the project
once to refresh the display.
