Read-only User
Name
Read-only User Name
is set as
user
by default, but can be changed, if desired.
User Password
This field allows you to specify a new user password. Once the user password is set,
the read-only user feature will be enabled.
Confirm User
Password
This field allows you to verify and confirm the new user password.
Web Session
Timeout
This field specifies the number of hours and minutes that a web session can remain
idle before the Pepwave router terminates its access to the web admin interface. By
default, it is set to
4 hours
.
Authentication
by RADIUS
With this box is checked, the web admin will authenticate using an external RADIUS
server. Authenticated users are treated as either "admin" with full read-write
permission or “user” with read-only access. Local admin and user accounts will be
disabled. When the device is not able to communicate with the external RADIUS
server, local accounts will be enabled again for emergency access. Additional
authentication options will be available once this box is checked.
Auth Protocol
This specifies the authentication protocol used. Available options are
MS-CHAP v2
and
PAP
.
Auth Server
This specifies the access address and port of the external RADIUS server.
Auth Server
Secret
This field is for entering the secret key for accessing the RADIUS server.
Auth Timeout
This option specifies the time value for authentication timeout.
Accounting
Server
This specifies the access address and port of the external accounting server.
Accounting
Server Secret
This field is for entering the secret key for accessing the accounting server.
CLI SSH &
Console
The CLI (command line interface) can be accessed via SSH. This field enables CLI
support. For additional information regarding CLI.
CLI SSH Port
This field determines the port on which clients can access CLI SSH.
CLI SSH Access
This menu allows you to choose between granting access to LAN and WAN clients,
or to LAN clients only.
Security
This option is for specifying the protocol(s) through which the web admin interface
can be accessed:
●
HTTP
Summary of Contents for Pepwave DCS-RUG
Page 53: ......
Page 54: ...12 5 4 Monthly All WAN Monthly Bandwidth Usage...
