peplink Pepwave DCS-RUG, User Manual

Page: 12 / 57

Wi-Fi Connection Settings
WAN Connection
Name
Enter a name to represent this WAN connection.
Standby State This setting specifies the state of the WAN connection while in standby. The
available options are Remain Connected (hot standby) and Disconnect (cold
standby).
MTU This setting specifies the maximum transmission unit. By default, MTU is set to
Custom 1440. You may adjust the MTU value by editing the text field. Click Default to
restore the default MTU value. Select Auto and the appropriate MTU value will be
automatically detected. The auto-detection will run each time the WAN connection
establishes
Reply to ICMP PING If this setting is disabled, the WAN connection will not respond to ICMP ping
requests. By default, this setting is enabled.
Wi-Fi WAN Settings
Channel Width Available options are 20 MHz, 40 MHz, and Auto (20/40 MHz) . Default is Auto (20/40
MHz), which allows both widths to be used simultaneously.