When this check box is checked, the device's status information will be sent to the
Peplink InControl system. This device's usage data and configuration will be sent to
the system if you enable the features in the system.
Alternately, you could also privately host InControl. Simply check the box beside the
“Privately Host InControl” open, and enter the IP Address of your InControl Host.
You can sign up for an InControl account at https://incontrol2.peplink.com/. You can
register your devices under the account, monitor their status, see their usage reports, and
receive offline notifications
5.10 Configuration
Backing up Pepwave router settings immediately after successful completion of
initial setup is strongly recommended. The functionality to download and upload
Pepwave router settings is found at
System>Configuration
. Note that available
options vary by model.
Configuration
Restore
Configuration to
Factory Settings
The
Restore Factory Settings
button is to reset the configuration to factory
default settings. After clicking the button, you will need to click the
Apply
Changes
button on the top right corner to make the settings effective.
Download Active
Configurations
Click
Download
to backup the current active settings.
Upload
Configurations
To restore or change settings based on a configuration file, click
Choose File
to locate the configuration file on the local computer, and then click
Upload
.
The new settings can then be applied by clicking the
Apply Changes
button on
the page header, or you can cancel the procedure by pressing
discard
on the
main page of the web admin interface.
Summary of Contents for Pepwave DCS-RUG
Page 53: ......
Page 54: ...12 5 4 Monthly All WAN Monthly Bandwidth Usage...
