2 Configuring the LAN interface(s)
2.1 Network Settings
LAN
interface settings are located at
Network>LAN>Network Settings/Port
Settings.
Begin setting up your physical LAN by entering IP settings (VLAN
configuration will be covered following physical LAN setup).
This represents the LAN interfaces that are active on your router (including VLAN).
A grey “X” means that the VLAN is used in other settings and cannot be deleted. You
can find which settings are using the VLAN by hovering over the grey “X”.
Alternatively, a red “X” means that there are no settings using the VLAN. You can
delete that VLAN by clicking the red “X”
Clicking any of the existing LAN interfaces will result in the following
IP Settings
IP Address &
Subnet Mask
Enter the Device Connector’s IP address and subnet mask values to be used on the
LAN. To enable multiple VLANs, press the
Summary of Contents for Pepwave DCS-RUG
Page 53: ......
Page 54: ...12 5 4 Monthly All WAN Monthly Bandwidth Usage...
