Pentax K20D - Digital Camera SLR Operating Manual Download Page 61

Page: 61 / 288

asic

ions

Using a Zoom Lens

Enlarge the subject (telephoto) or capture a wider area (wide angle) with
a zoom lens. Adjust it to the desired size and take the picture.

Turn the zoom ring to the right
or left.

Turn the zoom ring clockwise for
telephoto and counterclockwise for
wide angle.

• The smaller the number of the displayed focal length, the wider the angle.

The larger the number, the more magnified the image appears.

• Power Zoom (Auto Zoom) is available if a Power Zoom compatible FA lens

is used with this camera.

Wide Angle

Telephoto

Downloaded From camera-usermanual.com Pentax Manuals

Summary of Contents for K20D - Digital Camera SLR

































































































































































































































































































Search results

Summary of Contents for K20D - Digital Camera SLR

Reviews:

Related manuals for K20D - Digital Camera SLR

Brands by name

Popular brands

Pentax K20D - Digital Camera SLR, Operating Manual

Search results

Summary of Contents for K20D - Digital Camera SLR

Reviews:

Related manuals for K20D - Digital Camera SLR

Brands by name

Popular brands