Pentax K20D - Digital Camera SLR Operating Manual Download Page 121

Page: 121 / 288

119

Sho

ting

Func

tion

You can take pictures continuously at approximately 21 frames per second.
In this mode, images are saved with JPEG Rec. Pixels set to

(1536×1024) regardless of the save format setting (p.156). The JPEG
Quality set in the [

Rec. Mode] menu is used.

Press the

{

button.

The Fn menu appears.

Press the four-way controller (

)

and use the four-way controller
(

) to select

Press the

button.

The camera is ready to take pictures continuously.

Press the shutter release button halfway.

The autofocus system operates. The focus indicator

]

appears in the

viewfinder when focused.

Press the shutter release button fully.

Pictures are taken continuously while the shutter release button is fully
pressed until the camera buffer memory is full (JPEG Quality

maximum of approximately 115 pictures). The focus is locked during
shooting.

Burst Shooting

• The mirror raises during shooting and Instant Review is displayed

continuously on the monitor.

• The flash is turned off and the

button operation is unavailable in this mode.

• Multi-exposure and Auto Bracket are disabled in this mode.
• Select a setting other than

in the Drive Mode options screen to cancel

burst shooting. The setting is canceled when the camera is turned off if [Drive
Mode] in [Memory] of [

Rec. Mode] menu (p.236) is set to

(Off).

D r i v e M o d e

B u r s t S h o o t i n g

D r i v e M o d e

B u r s t S h o o t i n g

O K

Downloaded From camera-usermanual.com Pentax Manuals

Summary of Contents for K20D - Digital Camera SLR

































































































































































































































































































Search results

Summary of Contents for K20D - Digital Camera SLR

Reviews:

Related manuals for K20D - Digital Camera SLR

Brands by name

Popular brands

Pentax K20D - Digital Camera SLR, Operating Manual

Search results

Summary of Contents for K20D - Digital Camera SLR

Reviews:

Related manuals for K20D - Digital Camera SLR

Brands by name

Popular brands