Pentax K20D - Digital Camera SLR Operating Manual Download Page 111

Page: 111 / 288

109

Sho

ting

Func

tion

Center the subject to focus in
the viewfinder and press the
shutter release button halfway.

The focus indicator

]

appears and

you will hear a beep when the subject
comes into focus. (When blinking, the
subject is not in focus.)

Lock the focus.

Keep the shutter release button pressed halfway. The focus will remain
locked.

Re-compose the picture while
keeping the shutter release
button pressed halfway.

• The focus is locked while the focus indicator

]

is lit.

• Turning the zoom ring in focus lock mode may cause the subject to be out of

focus.

• The beep can be turned off. (p.219)

Downloaded From camera-usermanual.com Pentax Manuals

Summary of Contents for K20D - Digital Camera SLR

































































































































































































































































































Search results

Summary of Contents for K20D - Digital Camera SLR

Reviews:

Related manuals for K20D - Digital Camera SLR

Brands by name

Popular brands

Pentax K20D - Digital Camera SLR, Operating Manual

Search results

Summary of Contents for K20D - Digital Camera SLR

Reviews:

Related manuals for K20D - Digital Camera SLR

Brands by name

Popular brands