Pentax K20D - Digital Camera SLR Operating Manual Download Page 266

Page: 266 / 288

264

App

nd
ix

Troubleshooting

We recommend checking the following items before contacting a service
center.

Problem

Cause

Remedy

The camera

does not turn

The battery is not

installed

Check if a battery is installed. If not, install a

charged battery.

The battery power

is low

Replace with a charged battery or use the

AC adapter D-AC50 (optional). (p.39)

The shutter

does not

release

The lens aperture

ring setting is other

than the

position

Set the lens aperture ring to the

position

(p.84) or select [Permitted] in [36. Using

aperture ring] in the [

Custom Setting]

menu (p.251).

The flash is

charging

Wait until charging is finished.

There is no available

space on the SD

Memory Card

Insert an SD Memory Card with available

space or delete unwanted images. (p.40,

p.70)

Recording

Wait until recording is finished.

The

Autofocus

does not work

The subject is

difficult to focus on

Autofocus cannot focus well on subjects that

have low contrast (the sky, white walls), dark

colors, intricate designs, rapidly-moving objects

or scenery shot through a window or a net-like

pattern. Lock focus on another object located at

the same distance as your subject (press the

shutter release button halfway), then aim at

target and press the shutter release button fully.

Alternatively, use manual focus. (p.110)

The subject is not

in the focusing

area

Position the subject in the focus frame in the

middle of the viewfinder. If the subject is

outside the focusing area, aim the camera

at the subject and lock the focus (press the

shutter release button halfway), then

compose a picture and press the shutter

release button fully.

The subject is too

Move away from the subject and take a

picture.

The focus mode is

set to

Set the focus mode lever to

(Single

mode). (p.104)

The focus mode is

set to

(Continuous mode)

Autofocus is not locked (focus lock) when

the focus mode is set to

. The camera

will continue focusing on the subject while

the shutter release button is pressed

halfway. If there is a subject that you wish to

focus on, slide the focus mode lever to

and use the focus lock.

Downloaded From camera-usermanual.com Pentax Manuals

Summary of Contents for K20D - Digital Camera SLR

































































































































































































































































































Search results

Summary of Contents for K20D - Digital Camera SLR

Reviews:

Related manuals for K20D - Digital Camera SLR

Brands by name

Popular brands

Pentax K20D - Digital Camera SLR, Operating Manual

Search results

Summary of Contents for K20D - Digital Camera SLR

Reviews:

Related manuals for K20D - Digital Camera SLR

Brands by name

Popular brands