52
SunTouch
®
Control System Installation and User’s Guide
Mounting the SunTouch
®
Control System Power Center
The SunTouch
®
Control System Power Center can be mounted on a flat vertical surface, such as a wall or
post.
Note: Select a convenient location to mount the Power Center, making sure that the location is
greater than 5 feet from the pool or spa and no further than 15 feet from the pool/spa valve.
To mount the SunTouch Control System Power Center:
1. Position the Power Center against the vertical flat surface. If wall anchors are being used, support
the Power Center in position (horizontally level and square) against the surface and mark the
bracket hole pattern on the wall.
2. Secure the Power Center with three (3) screws in the mounting bracket holes. If using wall anchors,
use 3/16” drill and set the anchors and secure the enclosure with screws.
SunTouch
®
Control System Power Center Mounting Brackets
Mounting
bracket
Mounting
bracket
Mounting
bracket
RAINPROOF (TYPE 3R) CONTROL PANEL
FOR INDOOR OR OUTDOOR USE.
SUITABLE FOR SWIMMING POOL/SPA
APPLICATIONS.
ELECTRICAL RATINGS
INPUT:
120/240 VAC, 60/50 Hz, 820/410 mA MAX.
OUTPUT: 120 VAC, 20 FLA/120 LRA, 1.5 Hp
277 VAC, 17 FLA/120 LRA, 3.0 Hp
20A Tungsten, 50/60 Hz
USE COPPER CONDUCTORS ONLY
Label P/N 520784 Rev. C
SUNTOUCH CONTROL SYSTEM
FOR POOL AND SPA
®
POOL/SPA CONTROLLER
5K42
CAUTION –
RISK OF ELECTRIC SHOCK
KEEP DOOR CLOSED TO
PREVENT WATER DAMAGE.
