38
SunTouch
®
Control System Installation and User’s Guide
Service Menu (14/14): Service, Timeout, Auto
The Service operation features allow manual control of the SunTouch
®
Control System for pool service
purposes. The active service operating mode (Service Mode or Timeout Mode is displayed on the main
screen.
Service
mode:
This mode allows the auxiliary circuit buttons, filter pump, valves, heater and solar functions
to be operated manually. All control panel buttons, remote controllers, and menu scheduled programs are
disabled while the system is in Service mode, except for switching off equipment manually for emergencies.
If a power outage occurs while the SunTouch Control System is in Service mode, after power is restored the
system will power up in Service mode.
Timeout
mode
: Allows manual control of the SunTouch Control System for three (3) hours. After three hours
the system will automatically return to normal operation (Auto mode). Manual controls for Timeout mode
are same as Service mode. All control panel buttons, remote controllers, and menu scheduled programs are
disabled while the system is in manual mode, except for switching off equipment manually for emergencies.
If a power outage occurs while the SunTouch Control System is in Timeout mode, after power is restored the
system will power up in AUTO mode.
Auto (automatic) mode
: The SunTouch Control System is in normal operating mode.
To access the Service or Timeout menu settings:
Menu button:
Select the Service (14/14) menu.
Right button:
Press the button to access the System operation menu.
Up/Down buttons:
Select SERVICE or TIMEOUT.
Right button:
To access the Service or Timeout settings and each of the selections
shown below.
Up/Down buttons
: Select the setting.
The Service selections are:
F Pump:
OFF
, ON, HI SPD
VLV A, B:
POOL
, DRAIN, FILL, SPA
Heater:
OFF
, ON
Solar:
OFF
, ON
AUX 1, AUX, 2, AUX 3: OFF
, ON
VLV C:
OFF
, ON
Left/Right button:
Press the Left or Right button to activate Service or Timeout
mode and return to the main status screen. The active service operating mode is
displayed on the main screen while in shared equipment, single body, and solar only
operating modes.
To exit Service Mode or Timeout Mode:
Menu button:
Select the Service (14/14) menu.
Right button:
Press the button to access the System operation menu.
Up/Down buttons:
Select AUTO.
Left or Menu button:
Press the Left or Menu button to return to the main status
Main Menu 14/14
Service
System Operation
[AUTO ]
Service Mode
6:27 AM
Main Menu 14/14
Service
System Operation
[AUTO ]
System Operation
[SERVICE ]
Service Settings
F Pump: OFF
Service Settings
VLV A, B: POOL
Service Settings
Heater: OFF
Service Settings
Solar: OFF
Service Settings
AUX 1: OFF
Service Settings
VLV C: OFF
System Operation
[AUTO ]
System Operation
[SERVICE ]