29
SunTouch
®
Control System Installation and User’s Guide
To select a single-speed pump.
Menu button > Right button:
Select the
Pumps
9/14
menu.
Right button:
Press the button to select the pump settings.
Up/Down buttons:
Select Single Speed. A single-speed pump has no assigned
circuit. The pool filter schedule determines when the pump is switched on and off.
For more information, see Schedules Menu on page 17.
Right button:
Press this button to exit to the main menu items.
Left button:
Press the Left button to return to the main status screen.
TWO SPEED FILTER PUMP
Note: There must be a two-speed relay installed in the SunTouch
®
Control System enclosure and
plugged into the AUX3 connector for the “Two-Speed” pump menu feature to operate.
The Two Speed or High Speed can have a number of circuits or features associated with it. A maximum
number of four (4) items is allowed. The list includes Spa, Pool, AUX1, AUX2, AUX3, Feature 1–4, Solar,
Heater, Pool Heat, Spa Heat, Freeze, Pool/Spa, Solar/H (Solar/Heater).
Any Circuit or Item listed in one of the four (4) slots will force the pump to High Speed when that item is on
or active.
Assigned circuits will automatically switch a two-speed filter pump from low to high speed when these
circuits are switched on setup in the Schedules menu. If a two-speed pump is assigned to solar, as a cleaner or
fiilter pump, when the circuit is activated the pump will automatically run for five minutes in high speed then
switch to low speed.
Menu button > Right arrow button:
Select the
Pumps 12/14
menu.
Right button:
Press this button to select the
Pump Type
.
Up/Down buttons:
Select
TWO SPEED
.
Right button:
Select
High Pump Circuits
. You can assign up to four (4) High Speed
Circuits/Functions.
Up/Down buttons:
Select circuit you want to activate
High Speed
. The selection are
listed above. If a slot is unused, or you wish to make it unused select NONE.
Right button:
Select the second circuit to activate
High Speed.
Right button:
To move to the third or fourth slot. When at the fourth slot the
Right
Button
will return you to the menu at
PUMPS 12/14
.
Left button:
Press this button to return to the main status screen.
Note: ‘Pool/Spa’ is when either Pool or Spa is on, ‘Solar/HT’ is when Solar or
Heater is active. These are useful if you want High Speed in either case, and it saves
one of the four slots as you don’t need to enter them as separate items.
Note: The AUX3 output is dedicated for the use of a Two Speed relay. The AUX 3 in
schedules, or in one of the four (4) slots here for example it acts as an extra Feature
Circuit.
Note: If any circuit or item is listed in one of the four (4) slots the system will
automatically force High Speed for five (5) minutes anytime Solar, Heater, or Cleaner
first start up. If any of those items is listed in the High Speed list, it will of course
remain at High Speed as long as it is on or active.
Pump Type
[SINGLE SPEED]
Main Menu 12/14
Pumps
Pump Type
[TWO SPEED ]
Main Menu 12/14
Pumps
High Pump Circuits
1 - [POOL ]
High Pump Circuits
2 - [SPA ]
High Pump Circuits
3 - [NONE ]
High Pump Circuits
4 - [FREEZE ]
AUX 3 Circuit
[POOL ON ]
AUX 3 Circuit
[SPA ON ]
AUX 3 Circuit
[NONE ]
AUX 3 Circuit
[FREEZE ON ]
Main Menu 12/14
Pumps
