Pentair SIATA V132-SFE-EV-VIRIDION, Installer Manual

Page: 59 / 110

Installer Manual Siata V132-SFE-EV-VIRIDION - Programming
Ref. MKT-IM-009 / C - 08.06.2018 59 / 110
Calendar override
Note

The calendar override can be set from 0 (OFF) to 99 days.
Note

In case no regeneration occurred during this programmed interval of day (calendar
override), the controller will automatically start a regeneration.
Note

This type of regeneration is carried out at the regeneration time even on non-enabled days.
Note

This option is displayed only if SH (regeneration mode) is set to 1, to 2 or to 4.
Set the calendar override.
A Use and to set the calendar override.
B Press to validate and switch to the next parameter.
Main electrical frequency
Set the main electrical frequency to 50 or 60 Hz.
A Use and to set the frequency.
B Press to validate and switch to the next parameter.
Manual opening of brine valve
Note

During the opening and the closure of the brine valve, a mechanical movement appears on
the display. When the valve is completely open, the display shows bMON and when the valve
is completely closed, the display shows bMOF.
Caution

When this command is operated, the brine valve is under full control of the user/installer.
Warning

Pentair is not responsible for any damage caused by the incorrect use of this command by
the user/installer.
A Press to open the brine valve.
B Press to close the brine valve.
C Press to validate and switch to the next parameter.