Pentair SIATA V132-SFE-EV-VIRIDION, Installer Manual

Page: 51 / 110

Installer Manual Siata V132-SFE-EV-VIRIDION - Programming
Ref. MKT-IM-009 / C - 08.06.2018 51 / 110
6.4.2. Intermediate programming
Entering the intermediate menu
A Press and for 5 seconds to access the intermediate menu.
B Enter the password.
→ See “Access password”, page 49.
Regeneration mode
SH0: Time clock regeneration on predefined days;
SH1: Volumetric delayed regeneration;
SH2: Volumetric immediate regeneration;
SH3: Regenerations are initiated based upon a programmed time interval (every 2, 3, 4, 6, 8 or 12
hours). The first generation starts at the regeneration time set in the basic menu and following
regeneration will be carried out depending on the programmed interval;
SH4: Time clock regeneration.
Set the regeneration mode.
A Use and to change the selection.
B Press to validate and switch to the next parameter.
Display units type
Note

The display shows the unit use for remaining volume.
Note

The volume unit can be set in liters (Lt), in cubic meters (MC) or in gallons (GL).
Note

This parameter can be modified only in the advance programming menu.
Unit used for remaining volume:
A Press to switch to the next parameter.
Interval between regenerations
Note

This option is displayed only if SH (regeneration mode) is set to 3.
Set the interval between regenerations: 2, 3, 4, 6, 8 or 12 hours:
A Use and to set the interval.
B Press to switch to the next parameter.