INTELLIFLO
XF
®
and INTELLIPRO
XF
®
Variable Speed Pump Installation and User’s Guide
INTELLIFLO
XF
®
and INTELLIPRO
XF
®
Variable Speed Pump Installation and User’s Guide
5
Using the Operator Control Panel
Use the operator control panel to start and stop the
IntelliFloXF
®
Variable Speed Pump, program, set, and change
speeds (RPM), and access pump features and settings.
Speed 1:
Press to select Speed 1 (750 RPM). LED on
indicates Speed 1 is active.
Speed 2:
Press to select Speed 2 (1500 RPM). LED on
indicates Speed 2 is active.
Speed 3:
Press to select Speed 3 (2350 RPM). LED
on indicates Speed 3 is active.
Speed 4:
Press to select Speed 4 (3110 RPM). LED
on indicates Speed 4 is active.
Select:
Press to select the currently displayed option
on the screen.
Escape:
Goes one step back in menu; exits without
saving current setting.
Menu:
Accesses the menu items when and if the pump
is stopped.
Enter:
Saves current menu item setting. Press this
button to acknowledge alarms and warning alerts.
Arrow buttons:
•
Up arrow:
Move one level up in the menu or
increase a digit when editing a setting.
•
Down arrow:
Move one level down in the menu or
decrease a digit when editing a setting.
•
Left arrow:
Move cursor left one digit when editing
a setting.
•
Right arrow:
Move cursor right one digit when
editing a setting.
Controls and LEDs on Key Pad
Quick Clean:
Pump ramps up to higher RPM for
vacuuming, cleaning, adding chemicals, and after a
storm for extra skimmer power. LED light is on when
active.
Time Out:
Pump is not running on preset schedule. This
can be used to allow newly glued pipe joints time to dry
before circulation of water starts. LED is on when active.
Start/Stop button:
To start or stop the pump. When
LED is on, the pump is running or in a mode to start
automatically.
Reset button:
Reset alarm or alert.
LEDs:
On:
Green light when pump is powered on.
Warning:
On if warning condition is present.
Alarm:
Red LED on if alarm condition occurs.
See “Alerts and Warnings” on page 23.
Control Panel LCD Screen:
•
Line 1:
Key icon indicates password protect mode
is active. If password protect is not enabled, no key
icon is displayed. Also shows current time of day.
•
Line 2:
Displays current pump speed (RPM).
•
Line 3:
Countdown time and watts
•
Line 4:
Current pump status and current feature.
5
1
2
3
4
6
7
8
9
10
11
12
13
14
15
Control Panel #9-15
12:15
750 RPM
T 0.00 150 WATTS
Running Speed 1
Speed
1
Speed
2
Speed
3
Speed
4
Quick
Clean
Time
Out
15
Line 1
Line 2
Line 3
Line 4
9
13
12
10
11
14
12:15
750 RPM
T 0.00 150 WATTS
Running Speed 1
1
5
2
6
8
4
3
7
Speed
1
Speed
2
Speed
3
Speed
4
Quick
Clean
Time
Out
Control Panel #1-8
Key Lockout Icon
Current Speed
Countdown Time
Current Feature
Running
Current Time
Current Power Usage
