PENSOTTI PNCC-32N, Instruction Manual

Page: 57 / 81

INSTALLATION INSTRUCTIONS
54
5.3 Setting the parameters
P
ARAMETER
P00
–
SELECTS THE TYPE OF BOILER
To enter the parameters menu, follow the previously described procedure ( see
paragraph
5.2 ‘Accessing the parameters menu’
- steps 1-5).
6.
Use ‘ ’ and ‘ ’
buttons (D.H.W temperature setting)
to modify the
value of the parameter:
00 = NA
01 = PNCC
02 = PNCH with Indirect Water Heater
03 = NA
04 = NA
05 = PNCH
–
NO Indirect Water Heater
7. Press mode selection button
‘ ’ to confirm and to render the new
adjustment operative. The parameter number (P00) will appear on the
display.
8.
To exit from the parameters menu, press simultaneously ‘ ’ and ‘ ’
buttons.
P
ARAMETER
P01 - S
ELECTS THE TYPE OF GAS SUPPLY
To enter the parameters menu, follow the previously described procedure ( see
paragraph
5.2 ‘Accessing the parameters menu’
- steps 1-5).
6.
Use ‘ ’ and ‘ ’ buttons (D.H.W temperature setting)
to modify the
value of the parameter
00 = Natural Gas
01 = LPG
7.
Press mode selection button ‘ ’ to confirm and to render the new
adjustment operative. The parameter number (P01) will appear on the
display.
8.
To exit from the parameters menu, press simultaneously ‘ ’ and ‘ ’
buttons.
P
ARAMETER
P02 - S
ETS THE CENTRAL HEATING TEMPERATURE
To enter the parameters menu, follow the previously described procedure ( see
paragraph
5.2 ‘Accessing the parameters menu’
- steps 1-5).
6.
Use ‘ ’ and ‘ ’ buttons (D.H.W temperature setting)
to modify the
value of the parameter:
00 = standard (86-185°F)
01 = reduced (77-113°F) for under-floor heating
7.
Press mode selection button ‘ ’ to confirm and to render the new
adjustment operative. The parameter number (P02) will appear on the
display.
8.
To exit from the parameters menu, press simultaneously ‘ ’ and ‘ ’
buttons.
P00
03
P00
01
00
P01
01
P01
00
P02
01
P02